DIY Timber Floating Shelf Coat Rack
Step by step instructions to easily make this floating shelf coat rack.
G'day guys, another Friday / another DIY!
Thank you everyone for tuning in, we are loving bringing these woodworking projects to you each week - thanks for all of your feedback recently and sharing your DIY ideas with us! We've made a list and will work our way through them!
This week we decided to create a simple timber floating shelf coat rack. This is a great woodworking project for an entranceway, kitchen, bathroom or kids room!
Enjoy!
AL + IMO
“This is a great project for any room in your house. ”
TOOLS
TAPE MEASURE
PENCIL
DRILL
NAIL GUN OR HAMMER
SANDER OR SANDPAPER
SANDPAPER
DROP SAW
NAIL PUNCH
PROTECTIVE GEAR
SAFETY GLASSES
EAR PROTECTION
TIMBER
For this project we used 15mm Blackbutt hardwood flooring and 25mm Victorian Ash hardwood dowel.
BACKBOARD & SHELF - 950mmL x 115mmW x 15mm
DOWEL PEGS - 7 x 25mm Dowel x 100mmL
HARDWARE
NAILS
SCREWS
MATERIALS
HARD WAX OIL
WOOD PUTTY OF A SIMILAR COLOUR (OPTIONAL)
Step 1.
Because I used some scrap floorboards I ripped my edges down and plained them smooth.
Step 2.
I measured and cut my shelf and backboard to length 950mm. I then worked out how many dowel pegs I wanted for my shelf - I decided on 7.
Step 3.
To work out the length of my dowel pegs I measured the width of my top shelf timber and minused the thickness of the backboard so the pegs were even with my top shelf.
I made a mark on my drop saw and cut each dowel to length. 100mm
Step 4.
I sanded my shelf and backboard smooth with my orbital sander and then using hand sandpaper sanded my dowel - rounding off the outside edge of the dowel only.
Step 5.
I measured and marked my dowel spacings and with a set square and marked my centres. I pre-drilled on the front side of my backboard and in the centre of my dowels - making sure to drill straight.
100mm in from each end and then 125mm spacings.
Step 6.
I flipped over my backboard and using my spade-bit I drilled counter-sink holes where my pre-drilling holes had come through.
Step 7.
To attach the dowel I smeared a small amount of glue on the end. Using my drill I screwed through my backboard and as the screw poked through I lined my dowel and screwed it tight. I repeated this with the remaining dowels, making sure the end grain was vertical as I wanted all of them to match.
Step 8.
To attach the top shelf I glued, clamped and nailed it into place. I left it to dry with the clamps holding it in position and once dry I punched the nails in with my nail punch. I then gave the top and back a light sand.
Step 9.
I sealed our shelf with a hard wax oil that brings out the natural feature in the timber, once dry I filled the nail holes with similar coloured putty, gave it a light sand and added a second coat for a silky smooth finish.
Step 10.
Finally I attached the shelf to or wall, making sure to screw into the studs behind so it has a sturdy fixing and ensuring it was level
More Home Styling Tips
HEY! WE’RE AL + IMO
We’re a husband and wife duo, building our dream life one DIY project at a time. We are proudly self-taught, furniture-makers, business owners, designers and stylists.
DIY RUNS IN OUR DNA
We firmly believe what you learn should be shared which is why we created our Journal. A place where you can learn new skills and be inspired by other creatives.
Top Categories
ON THE JOURNAL
Looking for a fresh, vibrant meal that’s quick to throw together and always a winner? This Vietnamese noodle salad is on high rotation in our house – perfect for lunch or dinner. Packed with crunchy veggies, fresh herbs and a zesty dressing, it’s light, satisfying, and full of flavour. Whether you’re feeding the family or hosting friends, it’s sure to hit the spot!
This year, our raised veggie garden has truly become one of our favourite spaces at the Good Day House. Designed by the talented Simon Taylor Landscape Design, this little patch of paradise has been a joy to nurture and watch thrive. It’s not just a garden—it’s become a place of connection, learning, and delicious rewards!
In this guide, we’ll walk you through the step-by-step process we followed to install the timber cladding, from prepping the structure to adding the final touches. With the right tools and careful planning, you'll get a professional-looking finish that’s built to last.
When I say I have spent hours searching the internet for the perfect couch, I am not joking. So when Eva released their Everyday Sofa in terracotta I knew my search was over.
One of the big decisions we faced when planning the Good Day House was how to create a driveway that blended seamlessly with our home’s design while being environmentally conscious. After researching a few different options, we landed on using Adbri Masonry Turf Grid pavers—and we couldn’t be happier with the choice!
Upgrade your home WiFi with the ASUS ZenWiFi BQ16 router. Enjoy seamless connectivity, enhanced security, and improved performance for streaming, video calls, and more. Perfect for boosting productivity and family time.
If you’re lucky enough to have a green organics bin, you’re already part of the solution for reducing landfill waste and supporting a more sustainable planet. But are you using it correctly? Let’s dive into the dos and don’ts of green waste recycling in Victoria, so you can make the most of this fantastic resource.
Both Al and I love timber and we love to cook, so when it came to designing and building our kitchen we wanted to create a functional space and felt beautiful to be in. The kitchen has become the heart of our home, with our island bench the place we all gather around.
In the heart of our home lies a space where functionality seamlessly intertwines with style – our compact European laundry. Today, we're excited to share the design details and thoughtful choices we made to create this space.
For our family bathroom we wanted to create a functional, practical and beautiful space that felt like a dayspa. Click through to read how we created this space from start to finish.
Imogen Gilchrist
Imogen Gilchrist is a creative director, Squarespace website designer and social media strategist who loves good design & good people.